Which copper wire tension meter is used for measuring 0.1-05mm copper wire?

Copper wire tension meter refers to a device that measures the tension of linear materials such as copper wire, tungsten wire, steel wire, yarn, chemical fiber, carbon fiber, and glass fiber. If you measure the tension of 0.1-0.5mm copper wire, you can't just buy a simple tension meter. Here we must consider the wire diameter compensation and automatic zeroing of the tension meter. Also consider the specific measurement process requirements.

The first thing to consider is the wire diameter compensation. The wire diameter change of 0.1-0.5mm has a great influence on the measurement results of the copper wire tension meter. Therefore, a tension meter with wire diameter compensation function must be used, and the compensation range must include the range of 0.1-0.5mm.

The 0.1mm copper wire tension is very small, and the error caused by the change of the holding posture cannot be ignored, so a copper wire tension meter with automatic zeroing function should be used.

3. If the tension of the copper wire is measured during the winding process, the copper wire tension meter also needs to have a data analysis function to meet the tension detection during the winding process.

You can use NT-1000 series tension meter from Betten Technology Co., Ltd. to meet the copper wire tension measurement in the above wire diameter range.

The following are the specific parameters of NT-1000.

NT series 

General-purpose tension meter is suitable for tension measurement of fibers, wire, fiber optics, cable and other materials.

Features:

1. The patented technology automatically resets the meter to zero , which improves the measurement accuracy and facilitates measurement.

2. Equipped with a wire diameter compensator, which compensates errors caused by different wire diameters and improves measurement accuracy

3． Equipped with lead frame and guide wheel movement structure, it is easy to capture the tested material.

4． V-groove aluminum measuring guide roller with ball bearing.

5. Rugged, non-slip aluminum case, resistant to electrical interference.

6. LIPO lithium-ion polymer battery (about 60 hours of continuous operation).

7. The tested material, the guide roller, and the screen are located on the same plane. During the test, the test data, the status of the guide roller and the tested material can be seen.

8. A maximum of 10 materials can be accurately calibrated. With the wire diameter compensator, the tested wire diameter range is larger.

9. character menu setting interface, easy to operate.

10． According to different ranges and needs, the measurement value display unit can be selected g, kg, c N, N, daN, lb

11. It can record the maximum value, minimum value, peak value and average value in the measurement process, and can also store 10 independent measurement values.

12. Programmable setting of the maximum and minimum value of the trend status bar, clearly determine the range of tension change, and have the advantages of mechanical instrument trend display.

13. Provides fine adjustment of display results. If There is a slight deviation between the material measured on site and the standard calibration material, and accurate values can be displayed without recalibration.

14. Function settings can be protected by passwords to improve setting security.

15. Betten tensiometer provides two display modes, taking into account the advantages of accurate electronic tensiometer reading and mechanical tensiometer trend display.

-Digital display              -Digital display plus tension change trend bar

Model NT 

Unit conversion: 1daN = 10N = 1.02kg 1cN = 1.02g

NT shipment includes tension meter, portable meter box, charger, manual, certificate of compliance.

Specifications:

Accuracy :  (factory calibration material) 1% full scale (FS), (other materials) 3% FS.

Display update frequency :   0.5 seconds

Optional units:   gf, cN, N, kgf, daN, LB (switchable units are different for different ranges)

Adjustable range: The displayed value can be adjusted within ± 10 steps of 1% of full scale according to the site requirements

Line speed:   1000m / min

Stored value:   Maximum, minimum, maximum peak, minimum peak, average

Display :  Dot-matrix LCD

Shell size:  76 × 46 × 275mm

Power : Lithium-ion rechargeable battery, continuous working for about 10 hours

Operating temperature : 10-45 ° C, 90% relative humidity or less

Accessories :  Instrument, instruction manual, certificate, charger, instrument box

Applications: stranding machine, winding machine, wire cutting machine, carbon fiber winding equipment, optical fiber winding equipment, optical cable

Production equipment, glass fiber winding equipment, steel cord production equipment, tire production equipment, wire rope production equipment.