News

digital tension force guage digital tension tester

Digital tension force gauge and digital tension tester are force measuring tool used to measure the tension of wire. they mainly use the principle of three guide wheels to achieve tension measurement. Digital tension tester is a digital display tension meter with a wire diameter compensation and automatic zeroing function. For example, the universal tension meter NT series provided by Shenyang Betten  Technology Co., Ltd., including NT-1000, NT-2000, NT-5000, etc., are suitable for measuring the tension of copper wire, yarn, enameled wire, steel wire and other materials.

How to choose a digital tension force gauge or a digital tension tester suitable for copper wire tension measurement?

Copper wire is widely used in the electric wire and cable industry and other industries. In various production processes, there are specific requirements for the tension of copper wire. Generally, technicians choose a digital tension force gauge or a digital tension tester to measure the tension of copper wire. 

Usually choose a digital tension force gauge or digital tension tester, mainly based on the diameter range of the copper wire to be selected.

For example, when the diameter of the copper wire is less than 0.2mm, the change in the diameter of the measured wire has little effect on the measured value, and the tension measurement range is also small. The stability and accuracy of the results of the tension tester are mainly required. It is very important to choose a small and lightweight tension tester with automatic zeroing function. Without the auto-zero function, the change of the instrument's holding position will greatly affect the measurement results.

If the wire diameter is greater than 0.2mm, choose a tension tester with wire diameter compensation and automatic zeroing. The choice of range is important. The tension range of some small diameter copper wires is given below.

The diameter of the copper wire is less than 0.1MM. You can choose the NTS-100 tension meter produced by betten Technology Co., Ltd. with a range of 0.3-100.0g.

Copper wire diameter is between 0.1-0.2mm, you can choose NTS-500, the measuring range is 5-500g.

The copper wire diameter is between 0.2-0.4, and you can choose NT-1000 digital tension force gauge or digital tension tester  with wire diameter compensation function and automatic zeroing function.

NT Series: General-purpose tension meter, suitable for chemical fiber, textile, wire and cable industries。

The NT series has 10 kinds of tension ranging from 1.0-200.0cN to 10.0-100.0daN. The width of the measuring head varies with different ranges.

Features:

1. The patented technology automatically resets the meter to zero , which improves the measurement accuracy and facilitates measurement.

2. Equipped with a wire diameter compensator, which compensates errors caused by different wire diameters and improves measurement accuracy

3. Equipped with lead frame and guide wheel movement structure, it is easy to capture the tested material.

4. V-groove aluminum measuring guide roller with ball bearing.

5. Rugged, non-slip aluminum case, resistant to electrical interference.

6. LIPO lithium-ion polymer battery (about 60 hours of continuous operation).

7. The tested material, the guide roller, and the screen are located on the same plane. During the test, the test data, the status of the guide roller and the tested material can be seen.

8. A maximum of 10 materials can be accurately calibrated. With the wire diameter compensator, the tested wire diameter range is larger.

9. character menu setting interface, easy to operate.

10. According to different ranges and needs, the measurement value display unit can be selected g, kg, c N, N, daN, lb

11. It can record the maximum value, minimum value, peak value and average value in the measurement process, and can also store 10 independent measurement values.

12. Programmable setting of the maximum and minimum value of the trend status bar, clearly determine the range of tension change, and have the advantages of mechanical instrument trend display.

13. Provides fine adjustment of display results. If There is a slight deviation between the material measured on site and the standard calibration material, and accurate values can be displayed without recalibration.

14. Function settings can be protected by passwords to improve setting security.

15. Betten tensiometer provides two display modes, taking into account the advantages of accurate electronic tensiometer reading and mechanical tensiometer trend display.

1-200402103433951.jpg   1-20040210343a39.jpg

   -Digital display         -Digital display plus tension change trend bar

Model NT 

Model

Tension range

Measuring head   width

Diameter range

Calibration   materials (Polyamide Monofilament)

wire diameter   compensation

NT-200

2.0-200.0 cN

65mm

0.05-0.15mm

φ0.12mm

yes

NT-500

5.0-500.0 cN

65mm

0.05-0.2mm

φ0.12mm+φ0.2mm

yes

NT-1000

10-1000 cN

65mm

0.1-0.5mm

φ0.2mm+φ0.4mm

yes

NT-2000

20-2000 cN

116mm

0.3-0.7mm

φ0.4mm+φ0.7mm

yes

NT-2500

25-2500 cN

116mm

0.3-0.7mm

φ0.4mm+φ0.7mm

yes

NT-5000

50-5000 cN

116mm

0.4-1.0mm

φ0.7mm+φ1.2mm

yes

NT-10K

0.1-10.0daN

116mm

0.7-1.2mm

φ0.8mm+φ1.0mm

yes

NT-20K-F

0.2-20.0daN

116mm

1.0-1.8mm

φ1.2mm

yes

NT-30K-F

0.3-30.0daN

216mm

Customer specified wire diameter range

Customer specified materials

yes

NT-50K-F

0.5-50.0daN

216mm

Customer specified wire diameter range

Customer specified materials

yes

NT-60K-F

0.6-60.0daN

216mm

Customer specified wire diameter range

Customer specified materials

yes

NT-100K-F

1-100daN

216mm

Customer specified wire diameter range

Customer specified materials

yes

Unit conversion: 1daN = 10N = 1.02kg 1cN = 1.02g

Optional accessory special lever (Order code F Example: NT-1000-F, standard for NT-20K to NT-100k,recommended for NT-10K)

Measurement roller options

Standard guide roller 1000 m / min Hardened aluminum Standard guide wheel drawing.

Coder UB guide roller 1000 m / min Hardened aluminum Selection code UB, For example NT-1000-UB        

UB drawing

Coder TC guide roller 1000m / min Ceramic coated special steel Selection code NT-1000-TC        TC drawing

NT shipment includes tension meter, portable meter box, charger, manual, certificate of compliance.

Specifications:

Accuracy :  (factory calibration material) 1% full scale (FS), (other materials) 3% FS.

Display update frequency :   0.5 seconds

Optional units:   gf, cN, N, kgf, daN, LB (switchable units are different for different ranges)

Adjustable range: The displayed value can be adjusted within ± 10 steps of 1% of full scale according to the site requirements

Line speed:   1000m / min

Stored value:   Maximum, minimum, maximum peak, minimum peak, average

Display :  Dot-matrix LCD

Shell size:  76 × 46 × 275mm

Power : Lithium-ion rechargeable battery, continuous working for about 60 hours

Operating temperature : 10-45 ° C, 90% relative humidity or less

Accessories :  Instrument, instruction manual, certificate, charger, instrument box

Applications: stranding machine, winding machine, wire cutting machine, carbon fiber winding equipment, optical fiber winding equipment, optical cable

Production equipment, glass fiber winding equipment, steel cord production equipment, tire production equipment, wire rope production equipment.

Sorted by industry

Contact Us

Contact: China tension meter manufacturer BETTEN Technology

Phone: 13911001672

Tel: +86-24-24754482

E-mail: info@betten-tech.com

Add: Shenyang Shenbei International Science and Technology Cooperation Industrial Park