WELCOME TO THE OFFICIAL WEBSITE OF BETTEN TENSIOMETER!
ADDRESS:Betten technology Co.,Ltd.22nd Floor,Ocean Blue Diamond,No. 501 Nandi West Road,Heping District,Shenyang,China
PHONE:+86-13911001672
TEL:+86-24-24754482
BTS series tension sensor is suitable for tension measurement and monitoring of copper wire, enameled wire, steel wire, yarn and other wire materials.
Technical data – BTS series：
Rated measuring ranges available(FS)：0-0.5N to 0-1000N
Accuracy ： ±1%FS
Calibration： According to BETTEN factory procedure
Power supply： 5-10VDC
Input resistance： 350±5
Out resisitance： 350±5
Isolation resistance： ≥3000MΩ（50VDC）
Output on zero point： ＜0.1mv/v
Temperature influence on zero point： ±0.05%FS/10℃
Temperature influence on zero calibratiuon：±0.05%FS/10℃
Overload protection： 200%FS
Air humidity： 85%RH,MAX
Operational temperature range ： -10到+40℃
Housing material： aluminium
Weight net（gross）： approx. 400g(900g)
Connection cable： robust, flexible, shielded
4X0.2²，3mlong ,Cable ∅6mm，open ends with splices. Sheath special PVC
Connection type： Excitation voltage +：red
Excitation voltage -：black
Output signal +：green
Output signal -：white
Shielded wire：silver
Model | Tension range | Calibration material |
BTS-50 | 0.5-50.0cN | φ0.12mm (PA.) |
BTS-100 | 1.0-100.0 cN | φ0.12mm(P.A.) |
BTS-2009 | 2.0-200.0 cN | φ0.2mm(P.A.) |
BTS -500 | 5.0-500.0 cN | φ0.2mm(P.A.) |
BTS -1000 | 10-1000 cN | φ0.4mm(P.A.) |
BTS-2000 | 20-2000 cN | φ0.7mm(P.A.) |
BTS-5000 | 50-5000 cN | φ1.2mm(P.A.) |
BTS -10K | 1.0-100.0N | φ1.2mm (P.A.) |
BTS -20K | 2.0-200.0N | φ2mm （Steel rope） |
BTS-50K | 5.0-500.0N | φ2mm（Steel rope） |
BTS-100K | 10-1000N | φ2mm（Steel rope） |
